NVR User Manual
60
Add: Click this icon to save the position you need the IP camera to remember.
Delete: Select one preset position and click this button to delete it.
GO: Select one preset position in the preset drop-down list and click Go to make the
IP camera move the preset position.
【
How to do preset position?
】
Step1
Rotate the IP camera and stop at a desired place where you want make preset position.
Step2
click
button and input a descriptive name for the preset position. The preset position
cannot contain special characters. Then click
to save it. If you want to reset the preset
position, click
.
You can move the IP camera and stop at another place, and set another preset
position. You can do all the preset positions with this method.
Step3
If you want to see one preset position you have set, only select the preset position name from
the preset drop-down list, and click
button, the IP camera will go to the preset position.
4.4
Parameter Configuration
Choose ”
(Parameter Configuration)”, you can configure the Local Settings, Settings,
Service Configuration, User Management, System Management and so on.
4.4.1 Local Settings
Firmware Version
You can view the NVR system information, or modify the
Device Name
.
Choose ”
(Parameter Configuration) > Local settings > Firmware Version”. The
Firmware Version
page is displayed.
