SAB Goblin 700, Manual

Page: 19 / 44

Note: Although the Goblin can fly at high rpm, for safety reasons we suggest to not exceed 2000 rpm.
Some example configurations:
TRANSMISSION SETUP
It is important to choose the right reduction ratio to maximize efficiency based on your required
flight performance.
The Goblin has many possible reduction ratios at your disposal. It is possible to optimize any motor
and battery combination.
It is recommended to use wiring and connectors appropriate for the currents generated in a
helicopter of this class.
If you are using a head speed calculator which requires a main gear and pinion tooth count, use 214
teeth for the main gear (this takes into account the two stage reduction) and the tooth count of your
pulley as the pinion count.
Below is a list of available reduction ratios :
H0175-18-S - 18T Pinion = ratio 11.9:1 H0175-22-S - 22T Pinion = ratio 9.8:1
H0175-19-S - 19T Pinion = ratio 11.3:1 H0175-23-S - 23T Pinion = ratio 9.3:1
H0175-20-S - 20T Pinion = ratio 10.7:1 H0175-24-S - 24T Pinion = ratio 8.9:1
H0175-21-S - 21T Pinion = ratio 10.2:1 H0175-25-S - 25T Pinion = ratio 8.6:1
GOBLIN 700 KYLE STACY EDITION CONFIGURATIONS
GOBLIN 700 KYLE STACY EDITION CONFIGURATIONS
Rev:01
Battery Motor ESC Pinion
RPM
Max (Gov)
Pitch
3D CONFIGURATION
12S
5000/5500 mAh
Kontrionik Pyro 800-480
Edge 160 HV 21T
1800/1900 rpm
± 12,5
YGE 160 HV
KOSMIK 160/200
20T ± 12,5
Xnova 4530-500KV
KDE 700 G3 HP 505
Edge 160 HV 20T ± 12,5
YGE 160 HV
KOSMIK 160/200
19T ± 12,5
Scorpion HK-4525-520
Edge 160 HV 19T ± 12,5
YGE 160 HV
KOSMIK 160/200
18T ± 12,5
HARD 3D CONFIGURATION
12S
5000/5500 mAh
Kontrionik Pyro 800-480
COMPETITION
XNOVA XTS 4530-480
Edge 160 HV 22T
1900/2000 rpm
± 12,5
YGE 160 HV
KOSMIK 160/200
21T ± 12,5
Scorpion HK-4530-500
KDE 700 G3 HP 505
Edge 160 HV 21T ± 12,5
YGE 160 HV
KOSMIK 160/200
20T ± 12,5
Page 17
Chapter 9, Installation Of The Motor