9
connect the other end to the LNB IN socket on the receiver.
To the digital receiver, you can connect either a single satellite antenna directly or LNB of
multi-feed equipment.
7.2 Connecting the Network
1. Connecting to the LAN:
Connect one end of the Ethernet cable to the product and the other end to the LAN router.
2.Connecting to the Wi-Fi (Wireless LAN):
You can connect the network via the Wi-Fi access point or DSL/cable modem.
a.
Plug in the wireless USB dongle to the USB port.(Separate purchase required)
b.
Set the options for the Wi-Fi.
1.
Network Name (SSID):
Select the network name of your Wi-Fi access point from the list.
2.
Security Type (WEP):
This product supports WEP 40/128bit ASCII and WEP 40/128bit HEX. The security
type of the Wi-Fi and the product shall be set the same.
3.
Password:
When using the security type, you must set the password. Enter the same password in the Wi-Fi
setting menu.
3. Connecting to the 3G:
Connect the network via the 3G dongle. Plug in the USB that has 3G dongle.
Note:
1) Make sure the distance between the Wi-Fi access point and the product is not too far away. This may lower
the quality of service.
2) It is recommended to purchase a wireless USB dongle distributed by RT5370. Other products may not
function or respond.
3) It is recommended to purchase a 3G USB dongle distributed by huawei E1750 , E1550 , E1752 , E173
Other products may not function or respond.
4) We recommend the network connection over a direct LAN.
