27
1
We offer the functions for user to connecting
receiver (Master) to the other receiver (Slave) via
serial interface.
Connect master receiver to slave receiver via
serial interface. Enter “Software Upgrade” menu in
master receiver and press[left/right]keys to switch
upgrade mode
：
All SW+bootloader /All
SW+Channel list/Software(no channel
list)/Channel list.
2
Moving highlight to “Start” on master reeciver and
press[OK]key to start upgrade.
3
Turn on slave receiver and it needn’t operate any
setting.
4
Press [Exit]key to draw back.
11.8.5 Backup to USB
In this menu ,you can dump the software to the USB
equipment
1
In "Backup file",you can press [OK] key to edit the file
name.; Press “Left/Right” button select USB A or
USB B;
2
In "Backup to USB", you can press [OK] to start
backup software .
a)
Upgrade
By Satellite:
This function can upgrade the software through signal
lines from the satellite
1
Select the satellite and TP or input the TP value and
download PID, these parameters you can get from
your provider.
2
Then move the highlight to the start button and press
[OK] button to start upgrade.
b)
Upgrade By Terrestrial:
This function can upgrade the software through signal
lines from the Terrestrial
1
Select or input the Frequency, Bandwidth and
download PID, these parameters you can get from
your provider.
2
Then move the highlight to the start button and
press [OK] button to start upgrade.
