Note: Larger ID
Note: Smaller ID
Socket Head Cap
Screw M6x10mm
(HC124-S)
Washer
6x 14 x1.5mm
(HC194-S)
Bearing
10x 19x5mm
(HC422-S)
Washer 10x 16x1mm
(HC230-S)
Thrust Bearing
10x 18x5.5mm
(HC438-S)
Washer
10x 16x1mm
(HC230-S)
Washer 10x 16x0.2mm
[HC232-S]
Socket Head Cap Screw M3x16mm
(HC068-S)
Washer
3x 4x0.5mm
Socket Head Cap
Screw M2.5x18mm
(HC032-S)
Blade Grip Arm
(H1045-S)
Uniball M3
(H0065-S)
Socket Head Cap
Screw M4x10mm
(HC102-S)
Blade Grip
(H1044-S)
NOTE:
The HPS head should be assembled with one, 1mm shim (HC230) on each side. The
blade grips must move freely, but they should not move just under their own weight.
After approximately 10/20 flights, please check preload, you can add one or two 0.2mm
shim (HC232) if preload has changed.
eg: Microlube
GL261
Foam 2, BAG7
LINKAGE ROD
ASSEMBLED
RADIUS ARM
ASSEMBLED
Already assembled
with 1 bearing
UNIBALL RADIUS ARM
ASSEMBLED
Page 12
HEAD ASSEMBLY
