Note: S >> Left Side
Note: S >> Right Side
Note: Smaller ID
Note: Larger ID
Spindle Shaft
(H0329-S)
Oring
(HC335-S)
Spacer 5x 8.5x0.75mm
(H0330-S)
Uniball
M2.5x 5H6
(H0064-S)
Socket Head Cap
Screw M2x6mm
(HC004-S)
Spacer
7.5x 10x0.5mm
(H0330-S)
Thrust Bearing
5x 10x4mm
(HC435-S)
Button Head Cap
Screw M4x6mm
(HC096-S)
Tail Blade Grip Assembled
(H1033-S)
TAIL PITCH SLIDER ASSEMBLED
(H1112-S)
Tail Pitch Slider Link
(H0261-S)
Spacer
2x 3x3mm
Socket Head Cap
Screw M2x6mm
(HC004-S)
NOTE:
It is a normal for the tail to feel a bit tight after initial
assembly as the tail spindle preload is usually high when
the helicopter is brand new. The preload will loosen up
after 2-5 flights allowing the system to become smooth.
eg: Microlube GL261
Tail Shaft Assembled
(H1089-S)
eg: Microlube GL261
Foam 2, BAG9
Page 15
TAIL GROUP ASSEMBLY
