Saab TankRadar G3, Service Manual

Page: 18 / 27

18
Service Manual
G3 MaC Second edition, March 2000
4.2 Service
To replace the multiplexer board
Note: Mark the cables so that you can connect them again.
1 Disconnect the power cables.
2 Disconnect the communication cables.
3 Disconnect the cables to the cable terminal.
4 Dismount the board from the box.
5 Bring out the replacement board.
6 Verify the configuration of the address switches by compar-
ing with the old motherboard.
7 Put the old terminal in an ESD protection bag for transport
to Saab Marine Electronics.
8 Mount the board in the box.
9 Connect the cables to the cable terminal.
10 Connect the Communication cables.
11 Connect the Power cables.