8
How do I turn Cruise Control on?
To turn the system ON, slide the switch to the
right - ON (Cruise indicator will illuminate in the
main instrument panel).
How do I set the speed I want?
Accelerate to and maintain the desired speed
with the gas pedal. Then, move the thumbwheel
up or down (3 or 4) to the SET/+ or SET/-
position when you have reached the desired
speed (must be above 15 mph/25 km/h).
How do I disengage Cruise Control?
There are several ways to disengage Cruise
Control:
• Depress the brake or clutch pedal
• Move switch to the left - OFF position
Can I temporarily disengage Cruise
Control?
Yes. Slide the switch towards OFF (when you
release the switch it will move back to the right).
To re-engage the system, slide the switch to the
right - RESUME position.
Can I temporarily increase my speed with
Cruise Control set?
Yes. Accelerate, without shifting down, to
exceed the set speed (such as when trying to
pass a vehicle). When you release the acceler-
ator, the car returns to the set speed.
When I have Cruise Control set, can I
increase my pre-set speed without starting
over?
Yes. You can do this in several different ways:
• Accelerate to the desired speed and roll the
thumbwheel up (3) to the SET/+ position.
• Move the thumbwheel up to SET/+ position to
increase the speed in 1 mph increments.
Turn the thumbwheel up to the SET/+ position
until the desired speed is reached.
How do I reduce my pre-set speed while
Cruise Control is on?
You can reduce your pre-set speed three ways:
• Brake to the desired speed. Move the thum-
bwheel up or down (3 or 4) to the SET/+ or
SET/- position.
• Move the thumbwheel down (4) to the SET/-
position to reduce the speed in 1 mph
increments.
• Turn the thumbwheel down to the SET/-
position until the desired speed is reached.
(See your Owner’s Manual, section Starting
and driving).
1 ON: engaged
2 OFF: disengaged
3 SET/+: sets the speed and increases the set
speed
4 SET/-: sets the speed and decreases the set
speed
5 RESUME: re-engages the system at the set
speed
Cruise Control
