Battery Replacement
To change the batteries, do the following:
1. Remove the battery compartment door located on
the bottom of the remote control.
2. Replace the two AA batteries in the compartment.
Make sure that they are installed correctly, using
the diagram on the inside of the battery
compartment.
3. Close the battery door securely.
If the remote control is to be stored for a long period of
time, remove the batteries and keep them in a cool,
dry place.
Problem
Recommended Action
No power.
The ignition might not be
in on or accessory.
The parental control button
might have been turned
on. The power indicator
light will flash.
Disc will not play.
The system might be off.
The parental control button
might have been turned
on. The power indicator
light will flash.
The system might be in
auxiliary mode.
The disc is upside down or
is not compatible.
Problem
Recommended Action
The picture does not fill the
screen. There are black
borders on the top and
bottom or on both sides or
it looks stretched out.
Check the display
mode settings in the
display menu.
The disc was ejected, but
it was pulled back into the
DVD player.
The disc is being stored in
the DVD player. Press the
eject button again to eject
the disc.
In auxiliary mode, the
picture moves or scrolls.
Check the auxiliary input
connections at both
devices.
Change the Video Format
to PAL or NTSC. See
“Stereo RCA Jacks”
previously for how to
change the video format.
The language in the audio
or on the screen is wrong.
Check the audio or
language selection in the
main DVD menu.
3-93
Summary of Contents for 2006 9-7X
