Saab 2002 9-3 Owner'S Manual Download Page 54

Page: 54 / 256

Convertible

Fault messages in SID

The following CHECK messages are
included in the soft top system and can be
displayed on the SID together with a beep.

SID displays

Cause

Action

CHECK SOFT
TOP STORAGE

• The soft top storage bag is hooked up.
• An item in the trunk under the soft top is

obstructing the soft top.

• Unhook and lower the soft top storage bag, see page 56.
• Make sure that no item in the trunk is lying against the soft top

storage.

CLOSE TRUNK
LID

• The raising or lowering of the soft top is

obstructed because the trunk lid is not closed.

• Close the trunk lid so it is latched securely.

CHECK SOFT
TOP LATCHES

• The soft top is not latched to the top beam of the

windshield.

• Somebody is trying to lower the soft top while it

is still locked to the windshield beam.

• Lock the soft top with the locking handle, see page 51.
• Release the soft top with the locking handle, see page 49.

FINISH SOFT
TOP MOTION

• Raising or lowering was stopped before the

cycle completed.

• Finish the soft top motion completely.

CHECK SOFT
TOP COVER

• The soft top cover is not being locked.
• The soft top cover doesn’t open.

• Make sure that the valve for manual raising of the soft top is

closed, see page 52.

• Try to slide the ROOF button backwards once more.

SOFT TOP FAIL-
URE

• Serious fault in soft top mechanism.

• Try to slide the ROOF button once more.
• BE VERY CAREFUL AND MAKE SURE THAT NOTHING IS

OBSTRUCTING THE OPERATION OF THE SOFT TOP.
Remove anything that can obstruct the operation of the soft top.

• Operate the soft top manually, see page 52.

CHECK SOFT
TOP

• Something is in the way and is obstructing the

operation of the soft top by the electro-hydrau-
lics.

• The soft top cover has not locked at the front on

both sides.

• The 5th bow (rear window) has not locked to the

soft top cover on both sides.

• Try to slide the ROOF button once more.
• BE VERY CAREFUL AND MAKE SURE THAT NOTHING IS

OBSTRUCTING THE OPERATION OF THE SOFT TOP.
Remove anything that can obstruct the operation of the soft top.

Summary of Contents for 2002 9-3

































































































































































































































































Search results

Summary of Contents for 2002 9-3

Reviews:

Related manuals for 2002 9-3

Brands by name

Popular brands

Saab 2002 9-3, Owner'S Manual

Search results

Summary of Contents for 2002 9-3

Reviews:

Related manuals for 2002 9-3

Brands by name

Popular brands