manualshive.com logo in svg

Saab 2002 9-3, Owner'S Manual

The Saab 2002 9-3 Owner's Manual is a comprehensive guide essential for all owners. Available for free download, this manual provides detailed instructions on maintenance, troubleshooting, and operating this iconic vehicle. Get your copy now from manualshive.com, ensuring you have the necessary information at your fingertips.

Share
Download
background image

156

Starting and driving

Automatic transmission

 

The electronic control module for the auto-
matic transmission receives information on 
engine torque and road speed. It also con-
trols the hydraulic pressure in the transmis-
sion to ensure that gear changing is as 
smooth as possible.
The position of the selector lever is shown 
by the symbols adjacent to the lever and 
also by an indicator on the main instrument 
panel. 
The ignition key can only be removed when 
the selector lever is in the P position.

When the car is stationary, the engine must 
be idling when the selector lever is moved. 
You must have your foot on the brake 
pedal to move the lever out of park. 
If the accelerator is depressed while the 
lever is moved, this will result in abnormal 
wear in the transmission. 

WARNING

• Make it a habit to keep your foot on the 

brake when selecting a drive position, 
to prevent the car from creeping for-
ward (or backwards if reverse is 
selected). 

• The car must be at a standstill before 

P, R or N is selected. You have to have 
your foot on the brake pedal to move 
the lever out of park. If the car is still 
moving when a drive position is subse-
quently selected, this could cause a 
crash or damage the automatic trans-
mission.

• Never park the car with the selector 

lever in a drive position, even if the 
parking brake is on.

• If you want to leave the car with the 

engine running, move the selector 
lever to P or N and apply the parking 
brake.

NOTE

After selecting a drive position, pause 
briefly to allow the gear to engage (the car 
starts to pull a little) before you acceler-
ate. 

IB865

Selector lever 

1 Catch 
2 Button for SPORT position 
3 Button for WINTER position 

Summary of Contents for 2002 9-3

































































































































































































































































Reviews:

No comments

Related manuals for 2002 9-3

Daihatsu G200 Service Manual preview
G200
Brand: Daihatsu Pages: 485
Fass Titanium Series Installation Manual preview
Titanium Series
Brand: Fass Pages: 13
Jeep Wrangler 2011 Owner'S Manual preview
Wrangler 2011
Brand: Jeep Pages: 603
Jeep Patriot 2011 User Manual preview
Patriot 2011
Brand: Jeep Pages: 80
Vauxhall 2009 Tigra Quick Reference Manual preview
2009 Tigra
Brand: Vauxhall Pages: 2
Yakima K800 Instructions Manual preview
K800
Brand: Yakima Pages: 8
Roav R5141 Owner'S Manual preview
R5141
Brand: Roav Pages: 10
Volkswagen 1973 Convertible Owner'S Manual preview
1973 Convertible
Brand: Volkswagen Pages: 80
muth signal mirror 2005-2009 Ford Mustang Installation Instruction preview
signal mirror 2005-2009 Ford Mustang
Brand: muth Pages: 9
VDO DLD Wide Range II Installation Instructions Manual preview
DLD Wide Range II
Brand: VDO Pages: 84
Wagan TravelCharge Companion GO-Plus User Manual preview
TravelCharge Companion GO-Plus
Brand: Wagan Pages: 3
E&G Classics 1398-0502-09 Instruction Manual preview
1398-0502-09
Brand: E&G Classics Pages: 2
KEKO K617 Installation Description preview
K617
Brand: KEKO Pages: 3
Movon MDAS-5 Installation Manual preview
MDAS-5
Brand: Movon Pages: 43
Improved Racing E5G-601 Instructions Manual preview
E5G-601
Brand: Improved Racing Pages: 17
Fisher Body FOLDING TOP 1971 Service Manual preview
FOLDING TOP 1971
Brand: Fisher Body Pages: 37
Manik 519952T Installation Instructions preview
519952T
Brand: Manik Pages: 2
Thule 1809 Instruction Manual preview
1809
Brand: Thule Pages: 4

Brands by name

Popular brands

Load more brands