page: 13
USER GUIDE
Update : 7/2/11
0Z NOT FR 0906
Vitrea
9.0/ Repair mode
A short press on a blue or green key while there is no alarm will enter the repair mode. If the Altea 3 finds
problems that require your attention it will indicate them through the LCD display:
Fix the designated problem (generally by properly re-sticking the sensor, using a new adhesive) . The Altea
3 will then move to the next detected problem. When all problems are solved, the display shows the slowly
blinking dot again.
Graph009
REPAIR MODE
The LCD display toggles between the number
of the position where a problem was
detected and the type of problem
The control unit restarts
its operation normally
Fix the problem(s)
Briefly press
the remote
control button
Briefly press
the remote
control button
Blue remote control
Blue remote control
