page: 15
USER GUIDE
Update : 7/2/11
0Z NOT FR 0906
Vitrea
10.0/ Stop the Altea 3 (not recommended)
Caution: stopping the control unit will leave all products un-protected.
11.0/ Resetting the configuration
A long (more than 10 secs) press on the blue key will stop the control unit (=nothing protected), and com-
pletely reset the Altea 3 configuration (that was memorized during the installation phase and by further
adding products). This operation does’nt remove the keys.
The next time the Altea 3 is switched on (by pressing a valid key), it comes back to the "install mode" as
described in "first startup, 8)". Follow the steps described in first startup 8), until a new configuration is me-
morized.
12.0/ Removing products from the installation
1 -
If you own a yellow key:
Press on the yellow key. The display will show a specific pattern (cf. graph009) and a beep will be heard
every second. You have 10 seconds to take whatever product/sensor off the installation. This will not trig-
ger an alarm and the new configuration, taking the removal into account, will be memorized. Each time
you take a product off, you again have 10 seconds to remove another one if you wish.
Note: the yellow key allows a convenient and easy removal of products, the control
Graph009b
Pressing more
than 5 secs
Pressing more
than 5 secs
Red remote control
Red remote control
5’'
3 audio beeps
CONTROL
UNIT
“OFF”
1
Graph010
RESET THE CONTROL UNIT CONFIGURATION
5’’ long beep
Long press
on the remote control
Long press
on the remote control
Blue remote control
Blue remote control
+
than
10’'
