4
BEFORE USE
IMPORTANT!
- ELECTRICAL SAFETY
Always ensure you know how to use any electrical equipment before use.
Misuse of electrical equipment can result in injury or death.
Only connect the SA POWERNET EX MDU to a properly installed power supply system.
Check the supply is providing the correct voltage and current for the MDU, this is clearly displayed on
the type label.
If you use extension leads make sure these are suitable for your requirements.
Never put cables or the MDU where they could be damaged or could become a hazard to yourself or
someone else.
The equipment is to be used properly and according to its ratings, documentation and local/site
regulations.
You are responsible to ensure that any equipment is suitable for the environment in which it will be
used. The personnel using the unit have to be authorized by the operator or his representative.
The operator is also responsible for the safety of the equipment.
You must make sure that the equipment is selected, installed and used in accordance with regulations
(EN60079-14) and is checked before use.
This equipment must be kept in a suitable state by regular inspection and maintenance, see page #
This equipment must only be used for its intended purpose.
The certification details of the plugs can be found on the product type label.
If you are unsure about anything, get help before proceeding
IMPORTANT
This SA POWERNET EX MDU must not be taken into a Zone 0
SPECIAL CONDITIONS FOR SAFE USE
The Integral cable must be suitably terminated
All metalwork shall be earth bonded via the installation
MOVING AND SETTING UP THE MDU
The MDU should not be moved while energised; disconnect the power supply to the MDU before
moving and then move to new position before reconnecting.
