S4A WIEGAND-Ethernet, Manual

Page: 6 / 23

6 / 23
4. Set up a computer network
When connecting the device to the LAN, you need to set the network segment of the computer to
be the same as the network segment of the device. The default IP address of the device is
192.168.0.7, so the computer is also set to 0. The network segment IP is 192.168.0.201 ;
Because this device has a built-in web page, you can directly enter 192.168.0.7 in the IE browser
to set it up, as described in the following chapters.
5. USR-K2/USR-K3 different computer software
Connect one end of the device to the computer's network interface, and the other end to the
output of the Wiegand device, and connect the device with 12V/DC power. If the internal network
module of the device is USR-K2, open the software. If the internal network module of