Step 5
Slide plate(P) in when positioning and adjusting screws are tighten. Assemble the handle and its
body's back in order.
Step 3:
Remove the upper cover (C) of the handle and then the lower cover(C-1) by removing two screws
(A-1
B-1) to pull out plate(D).(Please refer to Fig5-Fig6)
Step 4:
Use two attached screws to screw the handle onto the appropriate position of the installation holes
when D is pulled out.(Please refer to Fig 7) Do not screw tight as to adjust both handle and body
lock positions well by closing the door for several times to make sure both of them are matched.
Screw the remaining three screws when they are matched.
3
P
Left opening door
Installation diagram
Fig8
Fig7
Fig6
Fig5
B
A
C
Screws
Screws
B-1
A-1
C-1
D
Adjusting to the
right and left.
Installing handle
