8
Sigma S1 Installation Manual
Si
gm
a
S1
Ins
tal
lat
ion M
anual
6.
Support Assembly
Installation Steps
Connect the girder (pre-assembled with purlin clamps), strut (pre-assembled) and pile together as shown in (Image
6.1). Please refer to the Project Drawings and BOM for the correct type, positioning and small parts used for the
connections. Make sure to observe the right tightening torques.
Note:
Depending on project specifications, an additional strut may be required. Refer to the project-specific drawings.
Image 6.1 General Structure of the Sigma S1 Support
