S.R.Smith keloXL KLED-C-XL-80 Installation Instructions Manual Download Page 8

S.R.Smith, LLC

800.824.4387

srsmith.com

© 2021 S.R.Smith, LLC   All rights reserved.   79-15283-00   1221 B   

Questions? 

Contact One of Our Dedicated Lighting Specialists. 

   

1-800-824-4387

   

x4012  or  x2282

W I N T E R I Z AT I O N   R E C O M M E N D AT I O N S

Swimming  Pools  may  or  may  not  be  drained  completely.  If  not  drained  completely,  the  water 
level  should  be  lowered  below  the  S.R.Smith 

kēloXL

  /  niche  location  and  make  sure  that  all 

water is drained from the niche and conduit if applicable. The 

kēloXL 

may be disengaged from 

the niche and brought up to the deck and secured under a sturdy covering for the winter period.  
Alternatively, the 

kēloXL

 may be disengaged as before but if enough cord has been left in the 

niche, the light may be sunk to the bottom of the pool during the winter season.  Weights may be 
needed to hold it place.  

NOTE

 - If water is trapped in the conduit, damage may occur from freeze expansion.

T H E R M A L   P R O T E C T I O N

This  sealed  light  is  equipped  with  thermal  protection  circuitry.    If  the  circuit  detects  that  the 
light  is  getting  too  hot  for  a  given  environment,  it  will  automatically  reduce  the  brightness  in 
increments until the light reaches a safe thermal threshold. If this condition occurs, it may or may 

not be noticeable by the human eye and is a normal operating function, not a sign of malfunction 

or failure.

Summary of Contents for keloXL KLED-C-XL-80









Reviews: