S.R.Smith keloXL KLED-C-XL-80 Installation Instructions Manual Download Page 3

3

Thank  you  for  purchasing  the  S.R.  Smith 

kēloXL

,  10”  class  LED  Light  for  underwater  retrofit 

wet-niche  lighting  applications.  This  light  should  fit  applications  where  the  niche  retaining 
tab  slot-to-pilot  screw  span  is  within  9.10”  to  9.50”  (up  to  9.65”  in  certain  niche  conditions).  

 

Will not fit Swimquip niche applications.

NOTE – 

Niche  must  be  in  good  condition  and  have  the  appropriate  pilot  screw  for  the  niche.  

This lighting product does not require bonding nor does it provide a bonding provision so if niche 
bonding is required, the niche must have a separate bonding mechanism.   

Install with large niches with similar mounting dimensions to model numbers:

   • Jandy: PLNICLRG, PLNICVFLRG, SSNICLRG1R

   • Pentair: 620004, 78210200 thru 700, 
       78210401, 79206700

   • Hayward: SP0600U

   • Sta-Rite: 05161-2352 thru 2369, 
       05163-2395 thru 2396 

ELECTRICAL SPECIFICATIONS

Input voltage:  12VAC

Color Change (RGB):  38 Watts max

White Only:  42 Watts max

Color control through power  

toggle triggers only.  

Not compatible with S.R.Smith 

 

PLX-PRM Controller

INPUT VOLTAGE RANGE                           

(based on S.R.Smith 

 

PLX-PW,PL 60W or 100W 

LV power unit - assumes 

120VAC input line voltage)

CORD LENGTH

STARTING VOLTAGE SETTING

up to 80'

12VAC

up to 150'

13VAC

150' +

3rd party unit 14-15VAC

Summary of Contents for keloXL KLED-C-XL-80









Reviews: