under test.
1.2.5 When carrying out measurements on TV or
switching power circuits, always remember that
there may be high amplitude voltages pulses at
test points which can damage the meter.
1.2.6 Never perform resistance measurements on
live circuits.
1.2.7 Always be careful when working with
voltages above 60V dc or 30V ac rms. Keep
fingers behind the probe barriers while measuring.
1.3 SYMBOLS
Important safety information, refer to the
operating manual.
Conforms to European Union Directive
Earth ground
1.4 MAINTENANCE
1.4.1 Please do not attempt to adjust or repair the
meter by removing the rear case while voltage is
being applied. A technician who fully understands
danger involved should only carry out such
actions.
1.4.2 Before opening the case of the meter, always
- 3-
