3.7.1 Connect the RJ45 test jack to one end of the
cable to be tested.
3.7.2 Connect the remote unit to the other end of
the cable.
3.7.3 Push TEST button to perform test. Example:
The Cable Fault is a SHORT on Pair 1-2 and Pair
3-6, the LCD status will be as follows:
Pair 1-2, Pair 3-6, Pair 4-5, Pair 7-8, SHIE and
SHO will display at the same time.
3.7.4 Push TEST button again, Pair 1-2, Pair 3-6
and SHO will display. Continue to Push TEST
button, the next pairs will display.
Fig.4
SPLIT PAIRS
Fig.3
REVERSED
Fig.2
MISWIRE
Fig.1
SHORT
Fig.5
RIGHT (PASS)
1
2
3
6
4
5
7
8
1
2
3
6
4
5
7
8
1
2
3
6
4
5
7
8
1
2
3
6
4
5
7
8
1
2
3
6
4
5
7
8
1
2
3
6
4
5
7
8
1
2
3
6
4
5
7
8
1
2
3
6
4
5
7
8
1
2
3
6
4
5
7
8
1
2
3
6
4
5
7
8
- 12-
