20
5.4
Menu Operation:
In this menu the user can do some operations on the UV system. The operation that may be done are:
restart the lamps hour meter, put the system in maintenance mode and calibrate the sensor (only in Rack
Plus / SMP UV versions):
5.4.1 Restart Counter
The system incorporate a “count down” from the last lamps replacement. When it is zero an alarm
inform that the user must change the lamps.
On every lamps replacement the partial hour timer must be reactivated.
This operation restarts the H Lamp to the standard value (that is the standard lifespan of that specific
lamp).
After the Hour Meter is restarted the number of lamp changes increases of 1. the number of lamp
changes can be also read in the READING menu. After this operation the sensor calibration must
always done.
Counter Reset
ENTER
Maintenance Mode
ON/OFF
MENU
Operations
Sensor Calibration
ENTER
Manual Cleaning
Counter Reset
ENTER
Confirm?
Lamp Changes
3
