SR200 with filters — How to
Copyright © 2013 by The S.E.A. Group
5
Ensure that the flange of the filter fits into the
groove of the attachment all the way around.
Fit a prefilter to the front of the main filter.
Fit a prefilter
IMPORTANT
:
A prefilter should ALWAYS be attached to the
front of any main filter, whether a particle or a
gas filter.
Place a new prefilter in the prefilter holder.
Snap the prefilter holder onto the front of the
main filter.
Give the mask a QUICK CLEAN
IMPORTANT
:
Only a CLEAN respirator can provide effective
protection. The mask should be cleaned and
checked after each use — a simple procedure
that takes only a minute.
Cleaning may be done with warm soapy water
and a soft cloth, or by using Sundstrom’s special
sterilised hygienic cleaning tissues that keep
your mask soft and flexible.
NEVER use solvents or abrasives.
