S/C Black BLK-IPS102M, User Manual, Page: 11 / 34

9 2.0 Megapixel H.264 Network IP Camera User Manual
SECTION 2: INSTALLATION AND SETUP
2.5 Install IPAdmin Tool
The IPAdmin Tool, included on the CD mini disk, will discover cameras installed on your network and
enable you to perform the initial network setup for each camera. After a camera is setup on the network,
the Microsoft Internet Explorer (IE) web browser can be used to see video from the camera, set the
camera’s password, date and time, finalize camera hardware adjustments, and configure the camera for
functional requirements.
The IPAdmin Tool can be loaded on a Microsoft Windows XP, Vista or Windows 7 operating system.
To use this utility for the initial setup of your camera, your computer must be connected to the same
network subnet as your camera.
To install the IPAdmin Tool, do the following:
1. Insert the CD mini disk provided with your camera into your computer’s CD ROM drive and open the
CD in a Windows Explorer window.
2. Establish a directory on your computer hard drive for the IPAdmin Tool application.
3. Copy the files IPAdminTool.exe and IPAdminTool.dll to your new directory.
2.6 Mount the camera
1. Install the camera mounting bracket using the instructions provided with the bracket.
2. Determine where the camera will be mounted and record the Media Access Control (MAC) address
of the camera. The MAC address can be found on the label on the bottom of the camera. Record
the information in the following table.
Location:
MAC address:
3. Attach the adapter for mounting the camera to the side with the label or to the opposite side with
the screws provided.