S/C Black BLK-IPS102M, User Manual, Page: 10 / 34

8
www.sc-black.com
SECTION 2: INSTALLATION AND SETUP
e. In this test, the message “Request timed out” indicates that your PC cannot reach the device
with that IP address, and that address is probably not in use. Enter this number into Table 1. If
this test indicated that that this IP address is in use, try other IP address using the steps above
until an unused address is found.
2.4 Check LAN for default IP address compatibility
Because all SC Black cameras and encoders are factory configured with the static IP address
192.168.0.100, check the LAN before connecting your camera to ensure that network conflicts won’t
occur.
At a Microsoft Windows computer attached to the LAN subnet where the camera will be connected, open
a Command Prompt window and enter:
ping 192.168.0.100
The “Request timed out” response indicates that the IP address is not in use and the camera can be
connected without causing errors.