7
H.264 Network IP Camera User Manual
SECTION 2: INSTALLATION AND SETUP
Example: Typical use of ipconfig in Windows XP
d. Enter the IP Address, Subnet Mask, and Default Gateway for your PC’s Ethernet adapter into
Table 2.
NOTE
The Ethernet adapter data you see by using ipconfig will probably be different from that
shown in the example above. If you are using Windows Vista or Windows 7, the IP address
is identified as the “IPv4 Address.”
Table 2. PC/Camera network settings
Computer (PC)
Camera
IP Address
Subnet Mask
Default Gateway
CAUTION
If connecting your camera to an enterprise network, consult with your network
administrator for the camera IP address, subnet mask, and default gateway.
2. At your PC, find an IP address on your network that is not in use:
a. Write down the EXACT IP address of your PC up to the third/last period. Using the example
shown above, this expression is: 192.168.1.
