background image

7

RECYCLING AND DISPOSAL

GENERAL MAINTENANCE

Recycle unwanted materials instead of disposing of

them as waste. All tools, hoses and packaging

should be sorted, taken to the local recycling centre

and disposed of in an environmentally safe way.
Recycle rather than dispose of unwanted material

in landfill whenever possible. The machine must be

delivered in rigid packaging to avoid damage

during transportation. The packaging and the

machine itself are manufactured from recyclable

materials and should be disposed of accordingly.
Only dispose of electrical/electronic/battery terms

in separate collection schemes, which cater for the

recovery and recycling of materials contained

within. Your cooperation is vital to ensure the

success of these schemes and for the protection of

the environment.
Recycle packaging where facilities exist.

This symbol is known as the Crossed

out Wheelie Bin Symbol. When this

symbol is marked on a product or

battery, it means that it should not be

disposed of with your general

household waste. Some chemicals

contained within electrical/electronic products or

batteries can be harmful to health.

SYMBOLS

SYMBOL

SIGNAL

MEANING

DANGER:

Indicates an imminently hazardous situation, which, if not avoided, will

result in death or serious injury.

WARNING

Indicates a potentially hazardous situation, which, if not avoided, could

result in death or serious injury.

CAUTION

Indicates a potentially hazardous situation, which, if not avoided, may result

in minor or moderate injury.

CAUTION

(Without Safety Alert Symbol) Indicates a situation that may result in

property damage.

Safety Alert Symbol

Indicates danger, warning or caution. It means attention!!! 

Your safety is involved.

Recycle Symbol

Waste electrical products should not be disposed of with 

household waste. Please recycle where facilities exist. 

Check with your Local Authority or retailer for recycling 

advice.

CE Marking

Conforms to relevant safety standards.  

Read Your Operator's

Manual

Your manual contains special messages to bring attention

to potential safety concerns as well as operating and

servicing information. Please read all the information 

carefully to ensure satisfaction and safe use.

Summary of Contents for WWD-100









Reviews: