![background image](http://html1.mh-extra.com/html/ryobi/ry908000e/ry908000e_operators-manual_1505611013.webp)
Page 9 — English
Example:
Tool or Appliance
Running
Watts*
Starting
Watts*
RV Air Conditioner
(11,000 BTU)
1010
1600
TV (Tube Type)
300
0
RV Refrigerator
180
600
Radio
200
0
Light (75 Watts)
300
0
Coffee Maker
600
0
2590 Total
Running Watts
1600 Highest
Starting Watts
Total Running Watts
2590
Highest Starting Watts + 1600
Total Starting Watts Needed
4190
GENERATOR CAPACITY
Make sure the generator can supply enough continuous (run-
ning) and surge (starting) watts for the items you will power
at the same time. Follow these simple steps.
1. Select the items you will power at the same time.
2. Total the continuous (running) watts of these items. This
is the amount of power the generator must produce to
keep the items running. See the wattage reference chart
at right.
3. Estimate how many surge (starting) watts you will need.
Surge wattage is the short burst of power needed to
start electric motor-driven tools or appliances such as a
circular saw or refrigerator. Because not all motors start
at the same time, total surge watts can be estimated by
adding only the item(s) with the highest additional surge
watts to the total rated watts from step 2.
NOTICE:
Do not overload the generator’s capacity. Exceeding the
generator’s wattage/amperage capacity may damage
the generator and/or electrical devices connected to it.
ELECTRICAL
POWER MANAGEMENT
To prolong the life of the generator and attached devices,
it is important to take care when adding electrical loads to
the generator. There should be nothing connected to the
generator outlets before starting its engine. The correct and
safe way to manage generator power is to sequentially add
loads as follows:
1. With nothing connected to the generator, start the engine
as described later in this manual.
2. Plug in and turn on the first load, preferably the largest
load you have.
3. Permit the generator output to stabilize (engine runs
smoothly and attached device operates properly).
4. Plug in and turn on the next load.
5. Again, permit the generator to stabilize.
6. Repeat steps 4 and 5 for each additional load.
Never add more loads than the generator capacity. Take
special care to consider surge loads in generator capacity
as previously described.
Tool or Appliance
Estimated
Running
Watts*
Estimated
Starting
Watts*
Home / Emergency
Incandescent Lights
(4 Quantity x 75 Watts)
300
0
TV (Tube Type)
300
0
Sump Pump (1/3 hp)
800
1300
Refrigerator or Freezer
700
2200
Well Pump (1/3 hp)
1000
2000
Furnace (1/2 hp)
800
2350
Radio
200
0
Tools
Drill (3/8
"
, 4 amps)
440
600
Circular Saw
(Heavy Duty, 7-1/4
"
)
1400
2300
Recip Saw
960
960
Miter Saw (10
"
)
1800
1800
Table Saw (10
"
)
2000
2000
*Wattages listed are approximate. Check tool or equipment for actual wattage.