background image

19

WARRANTY

LIMITED WARRANTY STATEMENT

Techtronic Industries North America, Inc., warrants to the 
original retail purchaser that this RYOBI

®

 brand outdoor 

product is free from defect in material and workmanship 
and agrees to repair or replace, at Techtronic Industries 
North  America,  Inc.’s,  discretion,  any  defective  product 
free of charge within these time periods from the date of 
purchase.

 

Two years if the product is used for personal, family or 
household use;

 

90 days, if used for any other purpose, such as com-
mercial or rental.

This  warranty  extends  to  the  original  retail  purchaser 
only  and  commences  on  the  date  of  the  original  retail 
purchase.
Any part of this product found in the reasonable judgment 
of Techtronic Industries North America, Inc. to be defective 
in material or workmanship will be repaired or replaced  
without charge for parts and labor by an authorized service 
center  for  RYOBI

®

  brand  outdoor  products  (Authorized 

Ryobi Service Center).
The product, including any defective part, must be returned 
to an authorized RYOBI

 service center within the warranty 

period. The expense of delivering the product to the service 
center for warranty work and the expense of returning it 
back to the owner after repair or replacement will be paid 
by the owner. Techtronic Industries North America, Inc.’s, 
responsibility in respect to claims is limited to making the 
required repairs or replacements and no claim of breach of 
warranty shall be cause for cancellation or rescission of the 
contract of sale of any RYOBI

®

 brand outdoor product. Proof 

of purchase will be required by the dealer to substantiate 
any warranty claim. All warranty work must be performed 
by an authorized service dealer.
This warranty is limited to ninety (90) days from the date 
of original retail purchase for any RYOBI

®

 brand outdoor 

product that is used for rental or commercial purposes, or 
any other income-producing purpose.
This warranty does not cover any product that has been 
subject to misuse, neglect, negligence, or accident, or that 
has been operated in any way contrary to the operating 
instructions  as  specified  in  this  operator’s  manual.  This 
warranty does not apply to any damage to the product that 
is the result of improper maintenance or to any product 
that has been altered or modified. The warranty does not 
extend to repairs made necessary by normal wear or by the 
use of parts or accessories which are either

 incompatible 

with the RYOBI

®

 brand outdoor product

 or adversely affect 

its operation, performance, or durability. 
In addition, this warranty does not cover:
A. Tune-ups – Spark Plugs, Carburetor, Carburetor Adjust-

ments, Ignition, Filters

B. Wear  items  –  Bump  Knobs,  Outer  Spools,  Cutting 

Lines, Inner Reels, Starter Pulleys, Starter Ropes, Drive 
Belts, Tines, Felt Washers, Hitch Pins, Mulching Blades, 
Blower Fans, Blower and Vacuum Tubes, Vacuum Bag 
and Straps, Guide Bars, Saw Chains

Techtronic  Industries  North  America,  Inc.,  reserves  the 
right to change or improve the design of any RYOBI

®

 brand 

outdoor product without assuming any obligation to modify 
any product previously manufactured.
ALL IMPLIED WARRANTIES ARE LIMITED IN DURATION 
TO THE STATED WARRANTY PERIOD. ACCORDINGLY, 
ANY  SUCH  IMPLIED  WARRANTIES  INCLUDING 
MERCHANTABILITY,  FITNESS  FOR  A  PARTICULAR 
PURPOSE,  OR  OTHERWISE,  ARE  DISCLAIMED  IN 
THEIR  ENTIRETY  AFTER  THE  EXPIRATION  OF  THE 
APPROPRIATE  TWO-YEAR,  ONE-YEAR,  OR  NINETY-
DAY  WARRANTY  PERIOD.  TECHTRONIC  INDUSTRIES 
NORTH  AMERICA,  INC.’S,  OBLIGATION  UNDER  THIS 
WARRANTY IS STRICTLY AND EXCLUSIVELY LIMITED TO 
THE REPAIR OR REPLACEMENT OF DEFECTIVE PARTS 
AND  TECHTRONIC  INDUSTRIES  NORTH  AMERICA, 
INC.,  DOES  NOT  ASSUME  OR  AUTHORIZE  ANYONE 
TO  ASSUME  FOR  THEM  ANY  OTHER  OBLIGATION. 
SOME STATES DO NOT ALLOW LIMITATIONS ON HOW 
LONG AN IMPLIED WARRANTY LASTS, SO THE ABOVE 
LIMITATION  MAY  NOT  APPLY  TO  YOU.  TECHTRONIC 
INDUSTRIES  NORTH  AMERICA,  INC.,  ASSUMES  NO 
RESPONSIBILITY FOR INCIDENTAL, CONSEQUENTIAL, 
OR OTHER DAMAGES INCLUDING, BUT NOT LIMITED 
TO, EXPENSE OF RETURNING THE PRODUCT TO AN 
AUTHORIZED RYOBI SERVICE CENTER AND EXPENSE 
OF DELIVERING IT BACK TO THE OWNER, MECHANIC’S 
TRAVEL TIME, TELEPHONE OR TELEGRAM CHARGES, 
RENTAL  OF  A  LIKE  PRODUCT  DURING  THE  TIME 
WARRANTY SERVICE IS BEING PERFORMED, TRAVEL, 
LOSS OR DAMAGE TO PERSONAL PROPERTY, LOSS 
OF  REVENUE,  LOSS  OF  USE  OF  THE  PRODUCT, 
LOSS  OF  TIME,  OR  INCONVENIENCE.  SOME  STATES 
DO NOT ALLOW THE EXCLUSION OR LIMITATION OF 
INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE 
ABOVE LIMITATION OR EXCLUSION MAY NOT APPLY 
TO YOU.
This warranty gives you specific legal rights, and you may 
also have other rights which vary from state to state.
This warranty applies to all RYOBI

®

 brand outdoor products 

manufactured by or for Techtronic Industries North America, 
Inc., and sold in the United States and Canada.
To locate your nearest Authorized Ryobi Service Center, 
dial 1-800-860-4050.

Summary of Contents for RY60511B























Reviews: