Ryobi RY5018, Operator'S Manual, Page: 26 / 120

Page 26 — English
of chain rotation. If they face backwards, turn the
loop over.

Place the chain drive links into the bar groove as
shown.

Position the chain so there is a loop at the back
of the bar.

Hold the chain in position on the bar and place
the loop around the sprocket.

Fit the bar flush against the mounting surface so
that the bar studs are in the long slot of the bar.

Replace the clutch cover ensuring that the adjust-
ing pin in the clutch cover is in the bar tension-
ing pin hole and that both bar studs are in their
respective holes in the clutch cover.
BAR
GROOVE
CHAIN DRIVE
LINKS
Fig. 36
CUTTERS
CHAIN ROTATION
CHAIN DRIVE LINKS
Fig. 35
MAINTENANCE
Fig. 38
Fig. 37
ADJUSTING
PIN
BAR STUD HOLES
CLUTCH
COVER
SPROCKET
BAR
MOUNTING
NUTS
CHAIN
TENSIONING
SCREW