12 — English
TROUBLESHOOTING
IF THESE SOLUTIONS DO NOT SOLVE THE PROBLEM CONTACT YOUR AUTHORIZED SERVICE DEALER.
PROBLEM
POSSIBLE CAUSE
SOLUTION
Handle not in position.
Handle adjustment knobs and/or handle
lock levers are not secured.
Make sure handle adjust knobs are fully
seated and handle lock levers are fully
closed.
Snow blower not starting.
Battery is low in charge.
Start button is not depressed.
Charge the battery.
Press start button.
The motor is on but the impeller does
not turn.
The drive belt is worn or broken.
Have the drive belt replaced by an
authorized service center.
After passing, the snow blower leaves
a layer of snow on the ground.
The scraper is worn.
The impeller mechanism is worn.
Replace the scraper. See
Replacing the
Scraper
in the
Maintenance
section.
Have the impeller mechanism replaced
by an authorized service center.
MAKE THE MOST OF YOUR PURCHASE!
Go to http://register.ryobitools.com and register your new tool on-line.
Your product has been fully tested prior to shipment
to ensure your complete satisfaction.
For any questions about operating or maintaining
your product, call the RYOBI Help Line!
This product has a Five-year Limited Warranty for personal, family,
or household use (90 days for business or commercial use).
For warranty details, visit www.ryobitools.com
or call (toll free) 1-800-860-4050.
Summary of Contents for RY40806
Page 39: ...NOTES NOTAS ...
