Ryobi RY36BI1800A, Manual

Page: 8 / 24

8
Original Instructions
Heat overload
Press reset
The inverter temperature is
out of the normal operating
range.
Allow the product to cool down
and reach the normal operating
temperature.
Press the reset button to reset the
AC output.
High temperature
warning
or
Low temperature
warning
The product is nearing the
maximum high or minimum
low operating temperature.
Allow the product to cool down
or warm up as needed to an
acceptable temperature, then press
the AC output button to continue
operation.
Press reset
High temperature
shutdown
or
Low temperature
shutdown
The product is outside
of the normal operating
temperature range.
Move the product to a cooler or
warmer area as needed, and allow
the product to reach the acceptable
operating temperature.
Low voltage warning The battery packs do not
have sufficient charge to
run the connected devices.
Disconnect some of the devices.
If condition persists, disconnect all
devices, and recharge the battery
packs.
Press reset
Low voltage shutdown The battery packs are
discharged.
Recharge the battery pack. If issue
persists, replace the battery packs.
System fault There is an internal
communication error.
Visit www.ryobitools.eu.
Call an authorised service centre.