Ryobi RY36BI1800A, Manual

Page: 7 / 24

7
Original Instructions
ERROR MESSAGE NOTIFICATIONS
Error Message Possible cause Solution
High temperature
or
Low temperature
(when the battery pack is
installed for charging)
The battery pack is outside
the acceptable charging
temperature range.
Allow the battery pack to reach the
acceptable charging temperature
range. The battery may need to
be removed from the port and
reinstalled to begin charging.
Incompatible battery
pack
(displays on the specific
battery pack slot)
The installed battery pack
is not compatible with the
product.
Remove the incompatible battery
pack.
For a list of compatible battery
packs, refer to the "Compatible
battery packs and power output"
section.
Battery pack is low.
(displays on the specific
battery pack slot)
The battery charge is low. Recharge the battery pack.
No battery pack in slot.
(displays on the specific
battery pack slot)
There is no battery pack
installed.
The battery pack is not
properly installed.
Remove and reinstall the battery
pack.
Battery fault
(displays on the specific
battery pack slot)
There are protection
features triggered in the
battery pack.
The communication
between the inverter and
battery pack fails during
charging.
The battery pack is
defective.
Wait until the protection feature
is disabled or when the LCD no
longer displays error message.
Use another battery pack.
Overloaded
Remove load and press
reset
The inverter output wattage
exceeds normal operating
range.
Remove the load and press the
reset button to reset the AC output.
Overloaded
Press reset
The inverter is overloaded. Press the reset button to reset the
AC output.