background image

 3 — English

  Use caution when positioning the pressure washer 

for use. 

Warm air from the motor could cause discolored 

spots on grass.

  Know your product. 

Read the operator’s manual care-

fully. Learn the machine’s applications and limitations 
as well as the specific potential hazards related to this 
product.

  To reduce the risk of injury, 

keep children and visitors 

away. All visitors should wear safety glasses and be kept 
a safe distance from work area.

  Use right product.

 Don’t force product or attachment to 

do a job it was not designed for. Don’t use it for a purpose 
not intended.

  Dress properly.

 Wear long pants and long sleeves. Do 

not wear loose clothing, neckties, or jewelry. They can get 
caught and draw you into moving parts. Rubber gloves 
and nonskid footwear are recommended when working 
outdoors. Also wear protective hair covering to contain 
long hair.

  Do not operate the equipment while barefoot or when 

wearing sandals or similar lightweight footwear. 

Wear 

protective footwear that will protect your feet and improve 
your footing on slippery surfaces.

  Exercise caution to avoid slipping or falling.

  Always wear eye protection with side shields marked 

to comply with ANSI Z87.1. 

Following this rule will 

reduce the risk of serious personal injury.

  Use only recommended accessories.

 The use of 

improper accessories may cause risk of injury.

  Check damaged parts.

 Before further use of the product, 

a guard or other part that is damaged should be carefully 
checked to determine that it will operate properly and 
perform its intended function. Check for alignment of 
moving parts, binding of moving parts, breakage of parts, 
mounting, and any other conditions that may affect its 
operation. A guard or other part that is damaged must 
be properly repaired or replaced by an authorized service 
center to avoid risk of personal injury.

  Never leave product running unattended. Turn power 

off.

 Don’t leave product until it comes to a complete stop.

 

Keep the motor free of grass, leaves, or grease

 to 

reduce the chance of a fire hazard.

 

Follow manufacturer’s recommendations for safe 
loading, unloading, transport, and storage of machine.

  Keep product dry, clean, and free from oil and grease.

 

Always use a clean cloth when cleaning. Never use 
brake fluids, gasoline, petroleum-based products, or any 
solvents to clean product.

 

Check the work area before each use. 

Remove all 

objects such as rocks, broken glass, nails, wire, or string 
which can be thrown or become entangled in the 
machine.

 

Do not use product if switch does not turn it off. 

Have 

switch replaced by an authorized service center.

  Avoid dangerous environment.

 Don’t expose to rain. 

Keep work area well lit.

  Do not abuse the cord.

 Never use the cord to carry the 

product or to disconnect the plug from an outlet. Keep 
cord away from heat, oil, sharp edges, or moving parts. 
Replace damaged cords immediately. Damaged cords 
increase the risk of electric shock.

  Ground Fault Circuit Interrupter (GFCI) protection 

should be provided on the circuit(s) or outlet(s) to be 
used for the product.

 Receptacles are available having 

built-in GFCI protection and may be used for this measure 
of safety.

 

To reduce the risk of electric shock, this product has a 
polarized plug (one blade is wider than the other) and 
will require the use of a polarized extension cord. 

The 

plug will fit into a polarized extension cord only one way. If 
the plug does not fit fully into the extension cord, reverse 
the plug. If the plug still does not fit, obtain a correct 
polarized extension cord. A polarized extension cord will 
require the use of a polarized wall outlet. This plug will 
fit into the polarized wall outlet only one way. If the plug 
does not fit fully into the wall outlet, reverse the plug. If 
the plug still does not fit, contact a qualified electrician to 
install the proper wall outlet. Do not change the equipment 
plug, extension cord receptacle, or extension cord plug 
in any way.

 

This pressure washer is not recommended for use 
with an extension cord. If an extension cord must 
be used, please make sure it is in good condition.  

When using an extension cord, be sure to use one heavy 
enough to carry the current your product will draw. A wire 
gauge size (A.W.G.) of at least 

14

 is recommended for an 

extension cord 25 feet or less in length. If in doubt, use 
the next heavier gauge. The smaller the gauge number, 
the heavier the cord. An undersized cord will cause a drop 
in line voltage resulting in loss of power and overheating.

 

WARNING: 

Use outdoor extension cords marked SW-A, 

SOW-A, STW-A, STOW-A, SJW-A, SJTW-A, or SJTOWA. 
These cords are rated for outdoor use and reduce the risk 
of electric shock.

 

Inspect extension cords periodically and replace if 
damaged. 

Keep handles dry, clean, and free from oil or 

grease.

  Never direct a water stream toward people or pets, 

or any electrical device.

 

Before starting any cleaning operation, 

close doors 

and windows. Clear the area to be cleaned of debris, 
toys, outdoor furniture, or other objects that could create 
a hazard.

SPECIFIC SAFETY RULES

Summary of Contents for RY1419MTVNM





















































Reviews: