WARNING:
Before mounting the router make sure you have read
and understood pages 9-11 of your owner’s manual.
Fig. 7
ASSEMBLY
11
Fig. 6
TO ATTACH SAFETY SHIELD
See Figure 6
7. Place the 2 holders
(M)
onto hinge of safety shield
(A)
.
Insert the safety shield with both holders on the 2 small
holes on tabletop. Attach 2 holders securely to tabletop
with 2 pan head screws
(Q)
. Use a #3 Phillips screw-
driver to keep from stripping the screw heads.
Q (2)
R (1)
V (1)
ASSEMBLE THE MITER GUIDE
See Figure 7
8. Place the miter guide head
(H)
on top of the miter bar
(J)
. Assemble miter guide by threading carriage bolt
(R)
through miter bar
(J)
. Place washer
(V)
and knob
(L)
on
end of carriage bolt and tighten the knob.
A
M
Q
H
J
R
L
V
SECURING THE ROUTER TABLE
WARNING:
DO NOT use the router table unless it is firmly
mounted to a stable work surface. Failure to securely
mount the router table could lead to serious personal
injury and/or property damage.
See Figure 8
1. Secure router table to the work surface using wood
screws or sheet metal screws and washers (not pro-
vided) through the holes.
Fig. 8
Bdal 6144.461 3Sprachen 04.06.2005 11:56 Uhr Seite 11
Summary of Contents for RT401W
Page 23: ...Notes 23...
