Ryobi RSH2545B, Original Instructions Manual

Page: 3 / 28

1
Safety, performance, and dependability have
been given top priority in the design of your
electric impact shredder.
INTENDED USE
The electric impact shredder is designed to
reduce organic garden waste materials, such
as branches, twigs and foliage into small
pieces.
The product is intended for outdoor use in a
stationary position, on firm level ground, by
an operator standing at the same level as the
base of the product.
The product is not intended for use by children
or persons with reduced physical, mental or
sensory capabilities.
The product is not intended for non-organic
material, metal or any material which exceeds
its maximum cutting capacity of 45 mm
diameter.
The product must be mounted on the stand
provided and must be used with the collection
box provided. It is not intended to be mounted
in any other way than described or shown in
this manual.
GENERAL SAFETY RULES
WARNING
When using the product, basic safety
precautions should be followed to reduce
the risk of fire, electric shock and personal
injury. Read all of these safety instructions
carefully before operating the product.
Make sure you are familiar with the controls
and the proper and safe use of the product.
Please keep these instructions safe for later
use.
TRAINING
■ Read the instructions carefully. Be familiar
with the controls and the correct use of the
product.
■ Never allow children or people unfamiliar
with these instructions to use the product.
Local regulations may restrict the age of
the operator.
■ Keep in mind, that the operator or user
is responsible for accidents or hazards
occurring to other people or their property.
PREPARATION
■ Wear ear protection and safety glasses at
all times while operating the product.
■ While operating the product, always wear
substantial footwear and long trousers.
Do not operate the product when barefoot
or when wearing open sandals. Avoid
wearing clothing that is loose fitting or that
has hanging cords or ties.
■ Operate the product in the recommended
position and only on a firm, level surface.
■ Do not operate the product on a paved
or gravel surface where ejected material
could cause injury.
■ Before use, always inspect and ensure
that the shredding means, bolts and other
fasteners are secure, and that the housing,
guards, and screens are undamaged
and in place. Replace worn or damaged
components in sets to preserve balance.
Replace damaged or unreadable labels.
■ Before use, check the supply and extension
cord for signs of damage or aging. If the cord
becomes damaged during use, disconnect
the cord from the supply immediately. Do
not touch the cord before disconnecting the
supply. Do not use the product if the cord is
damaged or worn.
■ Never operate the product while people,
especially children, or pets are nearby.
ELECTRICAL SAFETY
■ Read and understand all safety instructions
before connecting the product to the mains
supply.
■ Power plugs must match the outlet. Never
modify the plug in any way. Do not use
any adapter plugs with earthed (grounded)
power tools. Unmodified plugs and
matching outlets will reduce risk of electric
shock.
■ Before connecting to the mains supply,
make sure that the voltage is the same
as that indicated on the rating plate of the
product or in this manual. Connecting the
product to any other power supply may
cause injury or damage.
■ The manufacturer recommends you
connect to a power socket protected by an
RCD with a trip of 30 mA or less.
■ Keep the ventilation openings clear of
debris and other accumulations to prevent