background image

5

ENGLISH

running.

 

Never leave the machine unsupervised. First switch off 

the motor and disconnect from the mains.

ELECTRICAL SAFETY RULES

 

Make sure the cord is located so that it will not be 

stepped on, tripped over or otherwise subjected to 

damage or stress.

 

Do not abuse the power cord. Never carry the product 

by the cord. Never pull the plug out of the power point 

by the cord. Keep the cord away from heat, oil and 

sharp edges.

 

For outdoors work, use only suitably approved 

extension cables with a minimum conductor cross 

section of 1.5mm2. The plug connectors must have 

earthing contacts and be water-proof.

 

Inspect extension cords for deterioration, cuts or 

cracks in the insulation. Repair or replace the cords if 

any defects appear.

 

A nameplate on the product indicates the unit’s 

voltage. Never connect the product to an AC voltage 

that differs from this voltage.

 

If the power cord or extension cable becomes damaged 

during use, disconnect the cord from the power supply 

immediately. DO NOT TOUCH THE CORD BEFORE 

DISCONNECTING THE POWER SUPPLY.

 

Electrical power should be supplied via a Residual 

Current Device (RCD) with a tripping current of not 

more than 30mA.

MAINTENANCE RULES

 

Maintain the product with care. Follow instructions for 

changing accessories. Keep the product dry, clean 

and free from oil and grease.

 

Unplug the product before making adjustments or 

repairs.

 

Do not use the product if parts have been damaged. 

Check the product regularly to make sure that it will 

operate properly and perform the intended function. 

Check for alignment of moving parts, binding of moving 

parts, breakage of parts and any other condition that 

may affect the unit's operation. Inspect the unit’s 

power connection. Any part that is damaged should 

be properly repaired or replaced by Ryobi authorised 

service centre.

 

Never douse or squirt the product with water or any 

other liquid. Do not use detergents or solvents. Keep 

handles dry, clean and free from debris. After each 

use, clean with a soft and dry cloth.

   WARNING:

 

Before carrying out any maintenance operations, 

cut off the electric power supply by disconnecting 

the plug from the mains.

SERVICE RULES

 

Service on this product must be performed by qualified 

repair personnel only. Service or maintenance 

performed by unqualified personnel could result in 

injury to the user or damage to the product. Such 

service may also void your warranty.

 

Use only identical replacement parts when servicing 

the product. Follow the instructions in the Maintenance 

section of this manual. Use of unauthorised parts or 

failure to follow maintenance instructions may create 

a risk of electric shock, serious injury to the user or 

damage to the product. Such use may also void your 

warranty.

STORAGE AND TRANSPORTATION RULES

 

Store the product in a dry place.

 

Lock it up to prevent unauthorised use or damage. 

Keep the product out of the reach of children. 

 

Secure the product when transporting it.

 

Save these instructions. Refer to them frequently 

and use them to instruct others who may use this 

product. If you loan someone this product, loan these 

instructions also.

Summary of Contents for RSH2455G











Reviews: