7
ENGLISH
SERVICE
Servicing requires extreme care and knowledge and
should be performed only by a qualified service technician.
For service we suggest you to return the product to
your nearest authorised service centre for repair. When
servicing, use only identical replacement parts.
WARNING:
Observe all normal safety precautions related to
avoiding electrical shock.
WARNING:
To avoid serious personal injury, do not attempt
to use this product until you read thoroughly
and understand completely the operator's
manual. Save this operator's manual and review
frequently for safe operation.
WARNING:
The operation of any power tool can result in
foreign objects being thrown into your eyes,
which may cause severe eye damage. Before
beginning operation, always wear eye protection
such as safety goggles, safety glasses with side
shields or a full face shield. We recommend
Wide Vision Safety Mask for use over eye
glasses or standard safety glasses with side
shields. Always use eye protection.
SAVE THESE INSTRUCTIONS
SPECIFICATIONS
Model
RSH2455G
Voltage
230-240V~, 50Hz
Rated power
2400W (S6-40%),
2000W (S1)
Maximum idle speed
46/min
Maximum cutting
diameter
40mm
Weight
29kg
Guaranteed sound power
level
LWA: 94 dB(A)
WARNING:
Wet material can block the cutting assembly. To
help prevent blocking feed dry materials through
the machine at regular intervals.
NOTES:
■
The S6-40% indicates a load profile of 4 min. load and
6 min. idle time. For practical application, continuous
operation is permitted.
■
The maximum cutting diameter depends on the
hardness of the wood.
DESCRIPTION
a. Feed hopper
b. Switch panel
c. Handle
d. Discharge chute
e. Plunger
f. On/Off Switch
g. Forward/Reverse selection knob
h. LiveTool indicator
i. Over-load protector
1. Supporting legs
2. Axle
3. Main body
4. Lock washer
5. Round screw M5*8
6. End frame
7. Spring washer
8. Saddle washer
9. Hex socket screw M8*55
10. Flat washer
11. Wheel
12. Hitch pin
13. Adjusting hole
14. Allen key
ASSEMBLY
LEGS CAUTION:
Assembly of your shredder requires two people.
■
Insert the axle (2) through the holes into each
supporting leg (1).
Note: The legs should be angled outwards (see fig 3)
and the pin holes on the legs should face inside.
■
Turn the shredder upside down (see fig 4). Insert the
leg frame onto the motor housing (see fig 5).
■
Attach the end frame (6) onto the leg frame.
■
Secure the legs with hex screws (9), spring washer
(7) and a saddle washer (8). Secure the end frame
with round screws (5) and lock washer (4) (see fig 6).
Tighten all nuts and screws.
■
Insert wheels (11) onto the ends of the axle and secure
with flat washer (10) and hitch pin (12) (see fig 7).
■
Your shredder is now ready for use.
OPERATION
■
Your shredder is designed to shred dry garden waste
in a private garden. It is not suitable for shredding
