Ryobi RSH2445B, Original Instructions Manual

Page: 3 / 28

1
Safety, performance, and dependability have been given
top priority in the design of your electric silent shredder.
INTENDED USE
The product is designed for reducing organic garden waste
materials such as branches, twigs and foliage to small
pieces and is for use outdoors in a stationary position by
an operator standing on the ground. The product is not
intended for non-organic material, metal or material which
exceeds its maximum cutting capacity of 45 mm diameter.
The product must be mounted on the stand provided and
must be used with the collection box provided. It must not
be mounted in any other way than shown in this manual.
GENERAL SAFETY RULES
WARNING
The product is not intended for use by children or
persons with reduced physical, mental or sensory
capabilities. Young children should be supervised at all
times by someone other than the operator to ensure that
they do not play near or with the product.
WARNING
When using the product, basic safety precautions should
EHIROORZHGWRUHGXFHWKHULVNRI¿UHHOHFWULFVKRFNDQG
personal injury. Read all of these safety instructions
carefully before operating the product. Make sure you
are familiar with the controls and the proper and safe
use of the product. Please keep these instructions safe
for later use.
TRAINING
Ŷ
Become familiar with the user guide before attempting
to operate the product.
Ŷ
Never allow children or people unfamiliar with these
instructions to use the product. Local regulations may
restrict the age of the operator.
Ŷ
The operator or user of the product is responsible for
accidents or hazards occurring to other people or their
property.
PREPARATION
Ŷ
Do not allow children to operate the product.
Ŷ
Do not operate the product in the vicinity of bystanders,
especially children and pets.
Ŷ
Wear ear protection and safety glasses at all times
while operating the product.
Ŷ
Always wear protective non-slip footwear and long
trousers. Avoid wearing clothing that is loose fitting or
that has hanging cords or ties.
Ŷ
Only operate the product in open space (e.g. not close
to a wall or a fixed object) and on a firm, level surface.
Ŷ
Do not operate the product on a paved or gravel surface
where ejected material could cause injury.
Ŷ
Before starting the product, check that all screws, nuts,
bolts, and other fasteners are properly secured and
that guards and collection box are in place. Return to
an authorised service centre to replace damaged or
unreadable labels.
Ŷ
Before use, check the supply and extension cord
for signs of damage or aging. If the cord becomes
damaged during use, disconnect the cord from the
supply immediately. Do not touch the cord before
disconnecting the supply. Do not use the product if the
cord is damaged or worn.
ELECTRICAL SAFETY
Ŷ
Read these safety instructions thoroughly before
connecting the product to the mains supply.
Ŷ
Before switching on, make sure that the voltage of
your electricity supply is the same as that indicated on
the rating plate. The manufacturer recommends you
connect to a power socket protected by an RCD with a
trip of 30 mA or less.
Ŷ
Connecting it to any other power source may cause
damage.
Ŷ
If the supply cord is damaged, it must be replaced by
the manufacturer, its service agent or similarly qualified
persons in order to avoid a hazard.
Ŷ
The product is IPX4 rated excluding the plug. Only
use an extension cord that is weather proof. Check
the extension cord before every use for damage.
Always uncoil the extension cord during use because
coiled cords can overheat. Damaged extension cords
should not be repaired, they should be replaced with
an equivalent type.
Ŷ
A power spike causes voltage fluctuations and may
affect other electrical products in the same power
line. Connect the product to a power supply with an
LPSHGDQFH HTXDO RU OHVV WKDQ ȍ WR PLQLPL]H
voltage fluctuations. Contact your electric power
supplier for further clarification.
SPECIFIC SHREDDER SAFETY RULES
OPERATION
Ŷ
Before starting the product, look into the feeding
chamber to make certain that it is empty.
Ŷ
Keep your face and body away from the feed intake
opening.
Ŷ
Do not allow hands or any other part of the body or
clothing inside the feeding chamber, discharge chute,
or near any moving part.
Ŷ
Always be sure of your footing. Keep firm footing and
balance. Do not overreach. Never stand at a higher
level than the base of the product when feeding
material into it.
Ŷ
Always stand clear of the discharge zone when
operating the product.
Ŷ
When feeding material into the product be extremely
careful that pieces of metal, rocks, bottles, cans or other
foreign objects are not included.
Ŷ
If the cutting mechanism strikes any foreign objects or
if the product should start making any unusual noise or
vibration, switch the product off and allow the cutters to
completely stop. Disconnect the product from its power
supply, and take the following steps:
Ɣ
inspect for damage;