9
ASSEMBLING THE SPRAY WAND TO THE
TRIGGER HANDLE
See page 19 (step 5).
■
Place the threaded end of the spray wand
in the connector on the end of the trigger
handle.
■
Turn the connector clockwise until it stops.
This secures the spray wand in place.
CONNECTING HIGH-PRESSURE HOSE TO
TRIGGER HANDLE
See page 19 (step 5).
■
Screw the collar on the high-pressure hose
into the trigger handle inlet coupler by
turning the hose collar clockwise.
■
Pull on the hose to be certain it is properly
secured.
CONNECTING THE HIGH-PRESSURE
HOSE TO THE PUMP
See page 19 (step 7).
After the high-pressure hose has been
uncoiled and attached to the spray wand:
■
Align the collar on the threaded nipple on
the pump.
■
Insert the nozzle on the end of the high-
pressure hose collar into the threaded
nipple.
■
Turn the collar clockwise to tighten the
hose securely to the pump.
■
Pull on the hose to be certain it is properly
secured.
CONNECTING THE GARDEN HOSE TO
THE HIGH PRESSURE CLEANER
See page 19 (step 8).
The water supply must come from the mains.
Never use hot water or water from ponds,
lakes, etc. Before connecting the garden hose
to the high pressure cleaner:
■
Run water through the hose for 30 seconds
to clean any debris from the hose.
■
Inspect the filter in the high pressure
cleaner water intake.
■
If the filter is damaged, do not use the high
pressure cleaner until the filter has been
replaced.
■
If the filter is dirty, clean it before connecting
the garden hose to the high pressure
cleaner.
To connect the garden hose to the high
pressure cleaner:
■
Uncoil the garden hose.
NOTE:
There must be a minimum of 3
metres of unrestricted hose between the
high pressure cleaner intake and the
garden tap.
■
Attach the threaded hose coupler to the
high pressure cleaner water intake and
hand tighten.
■
With the garden tap turned completely off,
attach the end of the garden hose adapter
(not supplied) to the hose coupler.
OPERATION
WARNING
Do not allow familiarity with the product
to make you careless. Remember that a
careless fraction of a second is sufficient to
inflict serious injury.
WARNING
Always wear eye protection with side
shields marked to comply with EN 166.
Failure to do so could result in objects being
thrown into your eyes resulting in possible
serious injury.
WARNING
Do not use any attachments or accessories
not recommended by the manufacturer
of the product. The use of attachments or
accessories not recommended can result in
serious personal injury.
WARNING
Never direct a water stream toward people
or pets, or any electrical device. Failure to
heed this warning could result in serious
injury.
ADDING LUBRICANT TO THE ENGINE
See page 18 (step 11).
NOTE:
The product has been shipped with
approximately 0.06 L (2 oz.) of lubricant in the
engine from testing.
You must add lubricant
to the engine before starting it the first
time.
Summary of Contents for RPW3200
