6
English
RECOMMENDED CLEANING PROCEDURE
n
Dissolve dirt by applying detergent with the fan jet
to the dry surface. On vertical surfaces, work from
the bottom upwards. Leave the detergent to act for
1 to 2 minutes, but do not allow to dry out. Apply the
high pressure jet, keeping the nozzle at least 30cm
(10 in.) from the surface, working from the bottom
upwards.
n
Avoid allowing the rinsing water to run on to
unwanted surfaces.
STORAGE
n
Switch off the cleaner.
n
Turn off the water supply tap.
n
After use, the detergent residuals should be removed
from the tank.
n
Discharge residual pressure by pressing the trigger
until no more water comes out of the adjustable
nozzle.
n
Engage the gun safety lock.
n
Remove the plug from the socket.
n
Operate the cleaner with non-corrosive/ non-toxic
antifreeze before storing for the winter.
MAINTENANCE
CAUTION:
Before working on the cleaner, disconnect the
plug from the power supply socket.
n
To ensure good performance, check and clean the
suction and detergent filters after every 50 hours of
operation. (Fig.12)
n
Clean the nozzle with the tool provided. Remove the
lance from the gun, (Fig.13), remove any dirt from
the nozzle hole (Fig.14) and rinse.
DISPOSAL
Waste electrical products should not be disposed of
together with household waste. Please recycle where
facilities exist.
English
RPW080S manual.indd Sec2:6
RPW080S manual.indd Sec2:6
9/1/09 2:35:30 PM
9/1/09 2:35:30 PM
