![background image](http://html1.mh-extra.com/html/ryobi/rpht254o/rpht254o_original-instructions-manual_1507223010.webp)
8
(50 : 1)
50 : 1 / 2%
1
2
GETTING STARTED
Always wear safety goggles or safety glasses with side
shields when operating the product. Failure to do so could
result in objects being thrown into your eyes resulting in
possible serious injury. When handling the blade assembly,
wear non-slip, heavy-duty protective gloves. Wear non-
skid, protective footwear that will protect your feet
and
improve your footing on slippery surfaces.
Use synthetic 2-stroke lubricant only. Do not use
automotive lubricant or 2-stroke outboard lubricant. Mix
2% synthetic 2-stroke lubricant into the petrol. This is a
50:1 ratio.
4
3
1
2
5
Attach the J-handle. Insert the end of the J-handle between
the clamps so that holes align and handle will be located to
the operator’s left side. Push the bolt through the clamp and
handle. Install flat washer and lock nut to hold the assembly
in place. Adjust the position of the handle. Tighten the nut
securely.
Attach the shoulder strap hanger.
NOTE:
To quickly release the product from the harness,
sharply pull the quick release tab.