5
English (Original Instructions)
warm. It is reported that cold weather is a major factor
contributing to Raynaud's Syndrome.
■
After each period of operation, exercise to increase
blood circulation.
■
Ensure that the machine is correctly located in a
designated working position before starting the
machine.
■
Limit the amount of exposure per day. Take frequent
work breaks.
If you experience any of the symptoms of this condition,
immediately discontinue use and see your physician about
these symptoms.
WARNING
Injuries may be caused, or aggravated, by
prolonged use of a tool. When using any tool for
prolonged periods, ensure you take regular breaks.
TRANSPORTATION AND STORAGE
■
Stop the engine, and allow it to cool before storing or
transporting.
■
Clean all foreign material from the product.
■
Drain all fuel from tank into a container approved for
petrol. Remember to properly replace and tighten the
fuel cap.
■
Run the engine until it stops, this will remove all
fuel-lubricant mix that could become stale and leave
varnish and gum in the fuel system.
■
Store the product in a cool dry and well-ventilated
place that is inaccessible to children. Keep away
from corrosive agents such as garden chemicals and
deicing salts. Do not store outdoors.
■
When transporting the product secure it against
movement or falling to prevent injury to persons or
damage to the product.
■
Never carry or transport the product while the engine
is running.
■
Abide by all government and local regulations for
the safety storage and handling of petrol. Excess
fuel should be used in other 2-cycle engine powered
equipment.
SHORT TERM
■
Stop the engine, and allow it to cool before storing.
■
Clean all foreign material from the product.
■
Store the product in a cool dry and well-ventilated
place that is inaccessible to children.
■
Keep away from corrosive agents such as garden
chemicals and deicing salts.
■
Do not store outdoors.
DESCRIPTION
1. Primer bulb
2. Choke lever
3. Fuel cap
4. Starter grip
5. Throttle lock
6. Ignition switch
7. Throttle trigger
8. Rear handle
9. Front handle
10. Shoulder strap
11. Shaft
12. Grass deflector
13. Cutting line
14. Idle speed screw
15. Knob
16. Hanger cap
17. Quick release tab
18. Pro Cut II™ string head
19. Reel Easy
TM
string head
20. Screw
21. Clamp
22. Line exit holes
23. Spool retainer
24. Line load slots
25. Combination wrench
26. Mounting bracket
27. Screw
28. Lock button
29. Guide recess
30. Direction of cutter rotation
31. Best cutting area
32. Air box cover
33. Air filter
34. Rubber protect boot
35. Metal spark plug boot
36. Spark plug
37. Starter bit
38. Electrical starter (not included)
39. F/R button
40. Starter bit shaft
41. Shaft hole on the engine
42. Switch button
43. Shoulder strap latch
44. Cutting line
45. Spark arrestor