Ryobi RLM12E33H, Original Instructions Manual

Page: 6 / 28

and a proper discharge of the clippings.
■ Do not cut wet grass; it will stick to the
underside of the deck and prevent proper
collection or discharge of grass clippings.
■ New or thick grass may require a higher
cutting height.
■ If you wish to collect the grass cuttings for
disposal, fit the grass catcher making sure
the top flap is properly closed. Empty the
grass catcher regularly; otherwise, the
discharge chute will become blocked with
grass cuttings.
■ The product is designed to operate and cut
most effectively when moving forwards.
TRANSPORTATION AND STORAGE
■ Stop the product and disconnect from the
power supply, make sure that all moving
parts have come to a complete stop, and
allow it to cool down before storing or
transporting.
■ Clean all foreign materials from the product.
Store it in a cool dry and well-ventilated
place that is inaccessible to children. Keep
away from corrosive agents such as garden
chemicals and de-icing salts. Do not store
outdoors.
■ For transportation, secure the product
against movement or falling to prevent
injury to persons or damage to the product.
WARNING
Use extreme caution when lifting or tilting the
product for maintenance, cleaning, storage,
or transportation, the blade is sharp, keep
all body parts away from the blade while it
is exposed.
MAINTENANCE
WARNING
Use only original manufacturer’s
replacement parts, accessories and
attachments. Failure to do so can
cause possible injury, contribute to poor
performance, and may void your warranty.
WARNING
Servicing requires extreme care and
knowledge and should be performed only by
a qualified service technician. For service,
bring the product to an authorised service
centre for repair. When servicing, use only
original replacement parts.
■ Stop the product and disconnect it from the
power supply. Make sure that all moving
parts have come to a complete stop before
any cleaning or maintenance task.
■ You may make adjustments and repairs
described here. For other repairs, contact
the authorised service agent.
■ Check the grass catcher frequently for
wear or deterioration.
■ After each use, clean the product with a
soft dry cloth. Any part that is damaged
should be properly repaired or replaced by
an authorised service centre.
■ Check all nuts, bolts and screws at frequent
intervals for proper tightness to ensure the
product is in safe working condition.
■ Be careful during adjustment of the product
to prevent entrapment of the fingers
between moving blades and fixed parts of
the product.
■ When servicing the blades, be aware that
even though the power source is switched
off, the blades can still be moved.
■ The blade on the product is sharp. Use
extreme caution and wear heavy duty
gloves when fitting, replacing, cleaning or
checking bolt security.
■ Replace damaged blades and bolts in sets
to preserve balance.
CLEARING BLOCKAGES
■ Stop the motor and remove the power cord
from the supply outlet.
■ Always wear heavy-duty gloves when
checking or clearing a blockage.
■ The blades are sharp and the blockage
itself could be a sharp object.
■ Remove the grass catcher, check for and
carefully clear obstructions.
4