9
to possibly reduce the effects of vibration:
a. Keep your body warm in cold weather. When operating
the unit wear gloves to keep the hands and wrists
warm. It is reported that cold weather is a major factor
contributing to Raynaud’s Syndrome.
b. After each period of operation, exercise to increase
blood circulation.
c. Take frequent work breaks. Limit the amount of
exposure per day.
d. Injuries may be caused, or aggravated by prolonged
use of a tool. When using any tool for prolonged
periods ensure you take regular breaks.
If you experience any of the symptoms of this condition,
immediately discontinue use and see your doctor about
these symptoms.
OPERATING THE HEDGE TRIMMER
See figure 5
WARNING
Read the safety information for safe operation using the
blade. Extreme care must be taken when using blades
to ensure safe operation. Refer to Specific Safety
Rules.
■ Always hold the hedge trimmer with both hands when
operating. Use a firm grip on the handles. The unit is
used for cutting in either direction in a slow, sweeping
action from side to side.
■ The hedge trimmer should be positioned so that your
body will not come into contact with the silencer or
the power head. Stand so that you are stable and
balanced on both feet.
■ Inspect and clear the area of any hidden objects.
Never cut or trim anywhere you cannot clearly see the
entire length of the blades.
■ Never use the hedge trimmer near power lines,
fencing, posts, buildings, or other immovable objects.
■ Never use a blade after hitting a hard object without
first inspecting it for damage. Do not use if any
damage is detected.
MAINTENANCE
WARNING
When servicing, use only identical replacement parts.
Use of any other parts may create a hazard or cause
product damage.
WARNING
Always wear safety goggles or safety glasses with side
shields during product operation. If operation is dusty,
also wear a dust mask.
WARNING
Before inspecting, cleaning, or servicing the machine,
shut off engine, wait for all moving parts to stop, and
disconnect spark plug wire, move it away from spark
plug and allow the hedge trimmer to cool down.
Failure to follow these instructions can result in serious
personal injury or property damage.
GENERAL MAINTENANCE
Avoid using solvents when cleaning plastic parts. Most
plastics are susceptible to damage from various types of
commercial solvents and may be damaged by their use.
Use clean cloths to remove dirt, dust, lubricant, grease,
etc.
WARNING
Do not at any time let brake fluids, gasoline, petroleum
based products, penetrating lubricant, etc., come in
contact with plastic parts. Chemicals can damage,
weaken or destroy plastic which may result in serious
personal injury.
WARNING
Blades are sharp. When handling the blade assembly,
wear non-slip, heavy-duty protective gloves. Do not
place your hand or fingers between blades or in any
position where they could get pinched or cut. NEVER
touch blades or service unit with the spark plug wire
connected.
REPLACING BLADES
Periodically inspect the blades for damage and wear.
Always use the manufacturer’s replacement blades from
the authorized service centre. If any blades are damaged,
should be properly repaired or replaced by an authorized
service centre.
LUBRICATING THE BLADE
See figure 6.
For easier operation and longer blade life, lubricate the
hedge trimmer blade before and after each use.