ASSEMBLY INSTRUCTIONS
9
4. Attach the metal clip of the shoulder strap to the
latch support on top of the handle (Fig. 8).
Fig. 9
Fig. 7
Fig. 10
Fig. 8
5. Place the strap over your head and onto your
shoulder (Fig. 9).
6. While standing in the operating position (Fig. 9)
adjust length to fit the operator’s size.
•
Lengthen the strap by pulling down on the strap and
moving the buckle up (Fig. 10).
•
Shorten the strap by pulling the strap back through
the buckle while moving the buckle down (Fig. 10).
Latch Support
Clip
Latch
INSTALLING AND ADJUSTING THE SHOULDER
STRAP
1. Push the strap through the center of the buckle.
2. Pull the strap over the cross bar and down through
the slot in the buckle (Fig. 6).
Fig. 6
3. Fully extend the strap (Fig. 7).