background image

SAFETY AND INTERNATIONAL SYMBOLS

This operator's manual describes safety and international symbols and pictographs that may appear on this product. 
Read the operator's manual for complete safety, assembly, operating and maintenance and repair information.

SYMBOL

MEANING

• SAFETY ALERT SYMBOL

Indicates danger, warning, or caution. May be used in conjunction with other 
symbols or pictographs.

• WARNING - READ OPERATOR'S MANUAL 

Read the operator's manual before starting or operating this unit. Failure to follow operating 
instructions and safety precautions in the operator's manual can result in serious injury to the 
operator and/or bystanders. 

• FOR SERVICE INFORMATION, CALL:

USA:

1-800-345-8746

CANADA:

1-800-265-6778

• WEAR EYE AND HEARING PROTECTION

WARNING:

Wear safety glasses or goggles that are marked as meeting ANSI Z87.1-1989

standards, and ear/hearing protection when operating this unit.

• DO NOT USE IN THE RAIN

WARNING:

Avoid dangerous environments. Never operate your unit in the rain, or in 

damp or wet conditions. Moisture is a shock hazard.

• BLOWERS AND BLOWER/VACUUMS – ROTATING IMPELLER BLADES CAN

CAUSE SEVERE INJURY

WARNING:

Stop the engine and allow the impeller to stop before installing or changing 

tubes or bag.

RULES FOR SAFE OPERATION

5

• Unplug the Blower/Vacuum before attempting to

install or remove the blower/vacuum tube or 
vacuum bag. The unit must be unplugged, and the
impeller blades stopped to avoid contact with the
rotating blades.

OTHER SAFETY WARNINGS

• Store unit indoors. Store unit indoors in a dry place, up

high or locked-up, out of the reach of children.

• Use only genuine replacement parts approved by

Ryobi when servicing this unit. See servicing of 
double-insulated units in the maintenance and repair
section, page 14. The use of non-standard parts, or
other accessories or attachments not designed for this
unit, could result in serious injury to the user or
damage to the Blower/Vacuum and void your 
warranty.

• Maintain this Blower/Vacuum with care. Keep the unit

clean and serviced for the best and safest 
performance. Follow the maintenance instructions.
Always use a clean cloth when cleaning. Never use
strong detergents, gasoline, petroleum-based 
products, or any strong solvents to clean the unit.

• Keep your unit in good working condition. Follow

instructions for servicing and changing accessories.
Inspect unit periodically, and if damaged, have it
repaired by an authorized service facility. Inspect
extension cords periodically and replace if damaged.
Keep handles dry, clean, and free from oil and grease.

• Keep these instructions. Refer to them frequently and

use them to instruct other users. If you loan someone
this unit, also loan them these instructions.

SAVE THESE INSTRUCTIONS

Summary of Contents for RESV1300

















Reviews: