GENERAL SAFETY WARNINGS
RESIDUAL RISKS
■
Read all safety warnings and all instructions.
Failure to follow the warnings and instructions
may result in electric shock, fire and/or serious
injury. Save all warnings and instructions for future
reference.
■
Know your product. Read operator’s manual
carefully.
Learn its applications and limitations, as
well as the specific potential hazards related to the
product. Following the rule will reduce the risk of
electric shock, fire, or serious injury.
■
Do not let familiarity gained from frequent use
of tools allow you to become complacent and
ignore tool safety principals.
A careless action
can cause severe injury within a fraction of a
second.
■
Follow appliance manufacturer’s’ instructions
regarding operation and power.
Use of the
appliance different from those intended could result
in a hazardous situation.
■
Use the correct product for the application.
■
Do not allow children to operate the product or
play with the product as a toy.
Close attention is
necessary when used near children.
■
To reduce the risk of personal injury and electric
shock, the product should not be played with or
placed where small children can reach it.
■
The product is intended for household use only.
■
Use the product only for its intended use as
described in this manual.
■
If the product is not working properly, has been
dropped, damaged, left outdoors or dropped
into water, return it to your nearest service
centre.
■
Only use attachments and accessories specified
by the manufacturer.
■
Do not put any objects in ventilation openings.
Do not use the product with any opening blocked.
Keep openings free of dust, lint, hair and anything
that may reduce air flow.
■
Stay alert, watch what you are doing and use
common sense when operating the product.
Do
not use while you are tired or under the influence
of drugs, alcohol or medication. A moment of
inattention may result in serious personal injury.
■
Do not place product near any heat sources
such as radiators, heat registers, stoves, or
other products (including amplifiers) that
produce heat.
■
Do not place the product near fire or heat; it may
explode.
■
Do not place the product in closed bookcases
or racks without proper ventilation.
Allow a
minimum distance of 5cm from any foreign object.
■
Risk of uncontrolled situations when used in
ambient temperatures below 0°C (32°F) or above
40 °C (104°F).
■
Keep the product dry, clean and free from oil and
grease.
Always use a clean cloth when cleaning.
■
Keep handles and grasping surfaces dry, clean
and free from oil and grease.
Slippery handles
and grasping surfaces do not allow for safe handling
and control of the tool in unexpected situations.
■
Do not overreach. Keep proper footing and
balance at all times.
This enables better control of
the product in unexpected situations.
■
When servicing the product, use only
manufacturer’s replacement parts, accessories
and attachments.
Follow instructions in the
Maintenance section of the manual. Use of
unauthorised parts or failure to follow maintenance
instructions may create a risk of shock or injury.
■
Save these instructions.
Refer to them frequently
and use them to instruct others who may use this
tool. If you loan someone this tool, loan them these
instructions also
■
Do not let the pump run dr
constant pressure pump safety
y.
■
Do not remove hose while pump is still
operating.
■
Do not allow the product to run unattended.
■
Do not lift the pump by the hoses.
■
■
Periodically inspect the pump, hoses and intake
filter.
Ensure hoses and intake filter are free from
mud, sand and debris. Remove the battery before
inspecting.
WARNING
This appliance is not intended for use by person
(including children) with reduced physical, sensory
or mental capabilities, or lack of experience and
knowledge, unless they have been given supervision or
instruction concerning use of the appliance by a person
responsible for their safety.
Children should be supervised to ensure that they do
not play with the appliance.
WARNING
1
This product is intended for pumping water in
a Home Domestic application. Do not use it for
corrosive, abrasive, explosive or dangerous liquids.
Fluids other than water will damage the water pump
and/or create a fire hazard. Failure to follow all
instructions listed below may result in electric shock,
If the replacement of the supply cord is necessary,
this has to be done by the manufacturer or his
agent in order to avoid a safety hazard; The pump is
to be supplied through a residual current device
(RCD) having a rated residual operating current not
exceeding 30mA
warnings.
This product is designed for use with
drinking (potable) water in compliance to
Australian Standards.
AS/NZS 4020:2018
