1
English
GENERAL SAFETY RULES
■
Always wear personal protective safety glasses,
gloves, ear protectors, face mask or respiratory
equipment and protective clothing.
■
Always ensure machine is switched off before
connecting air supply.
■
Disconnect any machine from the air supply before
changing accessories, and before servicing any type
of machine.
■
Do not wear watches, rings, bracelets or loose clothing
when using air tools.
■
Do not overload the machine. Allow the tool to operate
at its optimum speed for maximum efficiency.
■
Do not increase the air pressure above the
manufacturer's recommended level, as excessive
overload can cause the machine casing to split. Also
this creates excessive wear on moving parts and
possible failure.
■
In the interest of safety and to prevent possible
damage/injury to the machine/operator, always ensure
that the machine has stopped before putting it down
after use.
■
Always ensure that the work piece is firmly
secured leaving both hands free to control the
machine.
■
Always ensure that the accessories are rated/designed
for use with the machine and are also correctly and
securely fastened before connecting the machine to
the air supply.
■
Ensure you read, understand and apply safety
instructions before use.
■
Keep children away from tools and workplaces.
■
Air tools are not generally insulated and should not
come in contact with electric power sources.
■
Release the start and stop device in case of an
interruption of the energy supply.
■
Check the speed after each service in relevant cases.
■
Special care has to be taken when assembling the
speed governor or protective devices.
SYMBOLS
Wear ear protection
Wear eye protection
Please read the instructions carefully before
starting the tool.
SPECIFICATIONS
Sanding Pad
90 x 150 mm (5-7/8” x 7-3/4”)
No-load speed
8,000 opm
Avg air consumption
170 L/min (6 cfm)
Operating pressure
90 psi (6.3 bar)
Air inlet size
6.35 mm (1/4”)
Weight
2.3 kg
A-Weighted sound
pressure level
79 dB + 3 dB
A-Weighted sound
power level
90 dB + 3 dB
Vibration value
1.36 m/s2
Uncertainty of
measurement
0.192 m/s2
Noise Emission Values is in accordance with EN ISO 4871
and EN ISO 15744.
Vibration emission value is in accordance with EN 12096,
EN 28662-1 and EN ISO 8662-8
APPLICATIONS
The tool is ideal for most types of
fi
nish applications. The
features of this tool include: rugged die-cast aluminum
body and steel plates for durability, variable speed control
throttle levers offer eliminating paint burning, built-in
regulator for positive speed control, and screened inlet to
prevent dirts particles from entering air intake.
AIR SUPPLY
■
Ensure air valve (or trigger) is in the “off” position
before connecting to the air supply.
■
Required air pressure of 90 psi, and an air flow
according to specification.
■
Disconnect air tool from the energy source before
changing blades or making adjustments.
■
Connect the tool to the air hose.
■
Press trigger to operate the tool.
■
DO NOT use any additional force upon the
tool.
■
DO NOT allow tool to free run for an extended period
of time as this will shorten its life.
