![background image](http://html.mh-extra.com/html/ryobi/ra-acddu1840/ra-acddu1840_operators-manual_1503672007.webp)
3
PrODUct sPeciFicAtiONs
Rated motor power
1350 W
Rated current
6 A
Air outlets
2 pcs, 6.35mm (1/4”)
Nitto-style quick
connector (coupler)
Quick connector fitting size
6.35 mm (1/4")
Weight
32.3 kg
Input
220 - 240 V AC, 50 Hz
Power cord length
2.0 m
Air tank capacity
40 L
Free air delivery
105 L/min (3.7 cfm)
Maximum air delivery
175 L/min (6.2 cfm)
at 0 bar tank pressure
Maximum air pressure
8 bar (115 psi)
Working pressure range
6 - 8 bar (87 - 115 psi)
Pressure gauge
2 pcs, 50.8 mm (2 in.)
diameter
Maximum rotational shaft
speed
2,
900
rpm
Short-circuit rating
3 kA
Operating temperature
0 - 45°C
Measured sound pressure
level (the reference
number of the noise test
code: EN ISO 2151:2008)
LpA=72.3 dB(A),
KpA=2 dB
Measured sound power
level (the reference
number of the noise test
code: EN ISO 2151:2008)
LwA=92.3 dB(A),
KwA=2 dB
iNteNDeD Use
This compressor is designed to supply pressurised air
only. It must not be used to compress any other gas. It is
designed to operate air powered tools. The compressor
should be operated under cover or protected from rain.
AssemBLy
UNPAckiNg
This product requires assembly. Carefully remove the
product and any accessories from the box.
wArNiNg
Do not use this product if any parts on the packing
list are already assembled to your product when you
unpack it. Parts on this list are not assembled to the
product by the manufacturer and require customer
installation. Use of a product that may have been
improperly assembled could result in serious personal
injury.
Inspect the product carefully to make sure no breakage
or damage occurred during shipping.
Do not discard the packing material until you have
carefully inspected and satisfactorily operated the
product.
wArNiNg
If any parts are damaged or missing do not operate this
product until the parts are replaced. Use of this product
with damaged or missing parts could result in serious
personal injury.
wArNiNg
Do not attempt to modify this product or create
accessories not recommended for use with this
product. Any such alteration or modification is misuse
and could result in a hazardous condition leading to
possible serious personal injury.
wArNiNg
Do not connect to power supply until assembly is
complete. Failure to comply could result in accidental
starting and possible serious personal injury.
Packing list
–
Air compressor
–
Air filter
–
Wheel x 2
–
Rubber foot x 2
–
Bolt x 2
–
Nut x 4
–
Flat washer x 8
–
Wheel axle cover x 2
–
Axle bolt x 2
–
Operator's manual
iNstALLiNg Feet
See figure 3.
1. Place a rubber foot under the left supporting frame at
the rear. Align the screw holes.
2. Insert a screw and washer in the holes in the rubber
foot and the supporting frame from the bottom.